Tuesday Tutorial ~ Paper Pumpkin Treats

This past month, I have been posting Flower Tutorials using images from our Cricut® Flower Market Cartridge.  I had originally planned on this week’s tutorial being the Poinsettia, but honestly, I am just not ready for Christmas yet.  I have always wanted to make these cute little pumpkins for the Thanksgiving table, so, this week,  I created this little Paper Pumpkin Treat in Design Space® using images from our Flower Market Cartridge.  I created this tutorial so that you can make these cute little Paper Pumpkin Treats for your Thanksgiving guests.  At the very bottom of this post, you can find a list of the supplies used on this project.

PaperPumpkinTreat.png
Paper Needed: 12″ x 12″ Goldrush Cardstock, 12″ x 12″ Fern Cardstock, 12″ x 12″ Toffee Cardstock, 12″ x 12″ White Daisy Cardstock

Design Space® and Assembly Instructions: 
1. Insert the Cherry Blossom Twig Wreath – #MD42136 into your Canvas.  DELETE the vine wreath image, then use CONTOUR to remove all but one of the leaves.
2. Turn the LEAF image so that it is upright (vertical) and RESIZE to 1.25″w x 3″h.
3. DUPLICATE the LEAF image five times (six leaves) and position the leaves into a “flower” shape.
Pumpkin_LeafArrangment
4.  Insert a CIRCLE shape and RESIZE to 1.25″.  Place the Circle into the center of the Leaves, then select WELD.


5. Insert a CIRCLE shape and RESIZE to 0.4″, then DUPLICATE the Circle five times (six circles).  Place each Circle onto the tip of each Leaf, then SELECT ALL and WELD.


6. To create the Stem, insert the Holly – #MFAE002 image into your Canvas, DELETE the Berries, then use CONTOUR to remove all the images except the “Fringe”.  The leaf was created from the Maple Leaf – #MD6F565 image, then RESIZED to 2″.
Pumpkin_Stem
NOTE: The Pumpkin itself is about 2″ tall. If you would like to make larger Pumpkins, you can resize all of the images before cutting.

7. To assemble the Paper Pumpkin, place glue onto a small circle at the tip of one of the Leaf shapes, then attach that circle to the circle on the Leaf shape next to it.  Continue around. (If you plan on putting candy in the center, add it before assembling the Pumpkin.)
Pumpkin_Assembly
8. To create the Stem, use a Quilling Tool to roll up the “Fringe” image, then glue the end closed.  Attach the Leaf to the top of the Pumpkin, then adhere the Stem to the top of the Pumpkin using Liquid Glass. Use the Quilling Tool curl the tips of the Stem.
Pumpkin_StemRolled

I created the tag using the “I am Grateful For You Jar” recipe from our Holiday Expressions catalog, and attached it to the stem with some White and Bronze Twine.  I hope that you take the time to create some of these cute Paper Pumpkin Treats for your Thanksgiving guests.  Please feel free to post what you have created on my Facebook page.  I can’t wait to see what you create!

Signature
Shop Cricut.com for 30% off Materials – excludes new, bulk, and bundle items.

Z3285
Flower Market Collection

product image
12 x 12 Goldrush Cardstock

product image
12 x 12 Toffee Cardstock

product image
12 x 12 Fern Cardstock

product image
12 x 12 White Daisy Cardstock

product image
Your Thoughts Here Stamp Set

product image
Falling For You Paper Packet

air_2_machine
Cricut Explore Air 2

product image
Basics Mini Pigment Pad Set

product image
Versa Mat

product image
Quilling Tool

product image
Bronze Sequins

product image
Liquid Glass

product image
White and Bronze Twine

product image
Bonding Memories Glue Pen

       

* The links provided to the Cricut® website are through the ShareASale affiliate program and are posted as an endorsement. ShareASale compensates me a small portion of sales made through these advertisement links.

Tuesday Tutorial – Flower Market Flower

Chocolate Sunflower

Did you  know that you can manipulate some of the images on our Flower Market Cricut® Cartridge to create other flowers?  Throughout the month, I have been posting simple tutorials to create the three-dimensional flowers on our Flower Market Cricut® Cartridge. This week, I am going to show you how create a Chocolate Sunflower using images on cartridge.   As always, I have listed the supplies used on this project at the bottom of this post.

ChocolateSunflower

  1. In Cricut® Design Space, insert the Chrysanthemum – #MFADEB0 image into your canvas. Delete all the images except for the largest flower.  Resize the flower to 6″.
  2. Insert a CIRCLE shape and size the image to 3″. SELECT ALL images and ALIGN CENTER.  (Sunflowers have very large centers.)
    Sunflower_CircleShape.PNG
  3. SELECT ALL and choose WELD, then DUPLICATE the image so that you have three flower layers.
    Sunflower_Weld.PNG
  4. Insert the Holly Wreath with Bow – #MD7AF54 image into your canvas, then DELETE the bow.  Resize the image to 3.5″wide.
  5. Duplicate the image and resize ¼” smaller to 3.25″ w. Duplicate three more times and resize the images to 3.0″w, 2.75″w, and 2.5″w. (You can choose to keep decreasing in size if you wish and skip step six.)
  6. Insert a CIRCLE shape and resize to 3″ for the center of the flower. This is what my Canvas looked like before I began cutting.
    Sunflower_Canvas.PNG
    NOTE: The leaves were created from Leaf – #MD43189 and cut at 3″w.
  7. To assemble the flower, begin by shaping the petals using your finger, flower shaping tools, or a bone folder. If desired, ink the centers of the petals with Nutmeg Ink, then layer so that each one is slightly off-set from the next. Use 3D Foam Tape between each layer for added dimension.
    Sunflower_PetalLayers.jpg
  8. Adhere the 3″ circle into the center of the flower.
  9. Fold each of the Holly Wreaths in half to create the “Seeds”, then adhere them inside the from the outside towards the center, decreasing in size.  Make sure each the the “Seeds” stay upright when gluing down the next layer.
  10. To create the leaves, cut a triangle shaped slit on the lower part of the leaf, then fold, overlapping the sides of the cut slightly, and glue into place.
    Sunflower_Leaves.jpg
  11. If desired, paint the center of the flower using a Gold Shimmer Brush.

This Sunflower be created with any shade from our beautiful cardstock color palette or cut from Watercolor Paper to create an washed color effect with our Watercolor paints.  Create an entire bouquet of these Sunflowers for your table by attaching each one to a wire stem.  I can’t wait to see what you create!

Signature

product image
Flower Market Cricut Bundle

product image
12 x 12 Nutmeg Cardstock

product image
12 x 12 Espresso Cardstock

product image
12 x 12 Fern Cardstock

product image
VersaMat

product image
Sponge Daubers Value Pack

product image
Nutmeg Exclusive Inks Stamp Pad

product image
Gold Shimmer Brush

product image
Fern Exclusive Inks Stamp Pad

air_2_machine
Cricut Air 2 Machine
product image
MicroTip Scissors
product image
Bonding Memories Glue Pen
product image
Bone Folder
product image
3D Foam Tape
product image
Tweezers

* The links provided to the Cricut® website are through the ShareASale affiliate program and are posted as an endorsement. ShareASale compensates me a small portion of sales made through these advertisement links.

Tuesday Tutorial ~ Flower Market Flower

Chrysanthemum

Our Flower Market Cricut® Cartridge has many three-dimensional flower images included along with all of the other amazing layered images.  Each week, I will be posting a simple tutorial of how to use those flower images to create the flowers show on the cartridge, PLUS how to make other flowers using the images included on the Flower Market Cricut® Cartridge. This week, I am going to show you how to create a Chrysanthemum  that you can use on your upcoming projects.   As always, I have listed the supplies used on this project at the bottom of this post.

Chrysanthemum

  1. In Cricut® Design Space, insert the Chrysanthemum – #MFADEB0 image into your canvas.
  2. Change the color of the flower images to the desired colors. You can do this by choosing the color by clicking the Ink Blot to open the Layers Attributes panel or by going to Color Sync and dragging them all to the same color.
  3. The leaves are created from the Leaf – #MD676A8 image.  I used the CONTOUR option to remove the inner cut-outs, sized the leaves proportionate to the largest flower, then duplicated.  This is what my canvas looked like before cutting my images.
    CricutFlowerMarketMumImages
  4. Once you have cut out the images, you can begin using your Bone Folder to curl the petals.  I use my Bone Folder on the petals as if I were curling ribbon with scissors.  Be gentle to avoid tearing the cardstock.    Since Close to My Heart is two sided cardstock, I choose to alternate the lighter and darker sides of my flowers when curling.
  5. Layer each set of same-size flowers together and adhere in the center.
    MumLayers
  6. Using a 3D Foam Dot, adhere each set of “Flowers” together. This will give it the same bulk and dimension as a true Chrysanthemum.
    MumFoamDot
  7. Adhere a Gem or paper circle in the center of the flower.
  8. Create a crease in the center of each leaf by folding it in half, then attach to the back of the flower using a 3D Foam Dot.

This can be created with any shade from our beautiful cardstock color palette or cut from White Cardstock and use ink to create an ombre effect.  I often like to search for  images of the flower I am creating for color options. God has created so many beautiful flowers in a variety of colors.  Your imagination is your only limit. I can’t wait to see what you create using this Chrysanthemum.

Signature

product image
Flower Market Cricut Bundle

product image
12 x 12 Saffron Cardstock

product image
12 x 12 Fern Cardstock

air_2_machine
Cricut Air 2 Machine

product image
VersaMat

product image
Bone Folder

product image
Bonding Memories Glue Pen

product image
3D Foam Dots

product image
Gold Glitter Gems

* The links provided to the Cricut® website are through the ShareASale affiliate program and are posted as an endorsement. ShareASale compensates me a small portion of sales made through these advertisement links.