Christmas Gift Card Pockets

For the Color My Heart Color Dare Challenge

As Christmas draws nearer, I am often scrambling to find some simple gifts to make that  required little effort and are easy on the budget. As I was playing with the Cedar & Pine papers, I realized that each of the patterns would work perfectly for some gift card pockets I wanted to create, and, coincidentally, we just happen to be using those same colors from Cedar & Pine collection at the Color My Heart Dare blog, this week.

72099944_10214887614885895_5225608592178020352_n.jpg

You can choose to use any of the colors on this week’s Tic-Tac-Toe board as well as any other neutrals, and your project(s) need to be linked to the site before December 19th. 

Almost everyone on my list enjoys getting gift cards and these sweet little pockets were super simple to make using the Buttoned Up Thin Cuts.  If you have some people on your list who you give gift cards to, I have written some step-by-step instructions for you, and created a simple process video for you to view so that you can create some of your own.

MissCarriesCreations-QuickChristmasGiftCardHolders.jpg

Paper Needed: 7½” x 3¾” Cedar & Pine Paper, 3″ x 4½” White Daisy, Cardstock & paper for the Buttoned Up embellishments

Gift Card Pocket Assembly Instructions”
1. Place the 7½” x 3¾” Cedar & Pine Paper with the shorter side at the top of the paper cutter/score board and score at  ¼” on each of the longer sides.

2. Rotate the paper 90° so that the longer side is at the top and score at 3¾”.
MissCarriesCreations-ScoreGiftCardPocket.png

3. Cut along the ¼” score lines a little bit past the to the 3¾” score line. Cut at an angle to create the tabs.
MissCarriesCreations-CutGiftCardPocket

4. Fold in the two tabs, apply adhesive to the tabs, then fold up at the 3¾” line to close the gift card pocket.
MissCarriesCreations-FoldGlueTabs.png

5. Once the pockets are complete, you can decorate them with the Buttoned Up Thin Cuts, Stickles, and Shimmer Brushes as I did.

MissCarriesCreations-ButtonedUpGiftCardHoldersYT.jpg

I hope that today’s project has inspired you to try something new and join us for this week’s Tic-Tac-Toe Color Dare Challenge.  If you would like to see how each one of these little gems was made, I have created a short process video for you to enjoy.

These Buttoned Up Thin Cuts dies are available for a limited time and are currently low in quantity. If you would like to purchase yourself a set to use on these Christmas Gift Card Pockets and to create my Holiday Treasures Treat Holders, you will want to snag yourself a set soon.

♥ I can’t wait to see what you create!

BlogSignature

Some of the links in this blog post are affiliate links. By clicking on those links, and making a purchase, your are helping to support my small business. This is at no additional cost to you. Thank you for your support.

Here is a list of the supplies used on this project

Buttoned Up Thin Cuts
Buttoned Up Thin Cuts

Cedar & Pine Paper Packet + Sticker Sheet
Cedar & Pine Paper Packet + Stickers

Cedar & Pine Coordinating Cardstock
Cedar & Pine Coordinating Cardstock

Gold Foil Paper
12 x 12 Gold Foil Paper

Black Shimmer Brush
Black Shimmer Brush

Weeding Tool Set
Weeding Tool Set (Tweezers)

Z3562
Silver Stickles™ Glitter Gel

Z3556
Green Stickles™ Glitter Gel

Z3563
Diamond Stickles™ Glitter Gel

Story by Stacy™ Short Story Workshop Kit—Black & White
Story By Stacy Short Story (Ribbon)

Z1151
Foam Tape

White Burlap Ribbon
White Burlap Ribbon

Candy Apple Striped Ribbon
Candy Apple Striped Ribbon

White & Gold Skinny Ribbon
White & Gold Skinny Ribbon

Z3341
Foam Dots

Portable Trimmer, 12"
Cricut Portable Trimmer

Z1836
Micro-Tip Scissors

Z3440
Dual Tip Permanent Glue Pen

         

Through the Year SOTM Blog Hop

Welcome to the Through the Year  Stamp of the Month Blog Hop where we will be featuring the November Through the Year stamp set. NovSOTMBadge This stamp set is perfect for planner addicts and paper crafters.   If you have come here from Tracie Cassidy’s blog, you are on the right path! When you are finished reading my post, you can click on the link at the end to move to the next blog.  This blog hop is designed to allow you to start here and work your way around. It’s simple, fun, and full of ideas using the Through the Year stamp set.

If you get lost along the way, you’ll find the complete list of participating consultants on Melinda’s Blog: http://ifyoublingit.blogspot.com/p/stamp-of-month-blog-hop-list.html.

During the month of November, I will be creating weekly projects using the Through the Year stamp set so make sure to visit often. This week, I have created a Christmas Gift Card Holder that I  designed in Cricut® Design Space.

GiftCard_FrontBack

If you have visited my blog in the past, you have noticed that I often take projects like this and design them to cut out on my Cricut®.  This allows me to re-use the project at a later date without needing to figure out the measurements, cuts, and score lines again.  Below, you will find a short tutorial of how I went about creating this Christmas Gift Card Holder in Design Space®.  As always, I’ve included a list of the products used to create this project at the very bottom of this post.

GiftCard_Inside

Paper Needed: 10″ x 5″ New England Ivy Cardstock, 2½” x 4″ B&T Paper (Beary Christmas), 2″ x 4″ B&T Paper (Beary Christmas), (2) ¾” x 4″ B&T Paper (Beary Christmas), (2) ¼” x 4″ Silver Foil Paper

Design Space Instructions:
1. Insert a SQUARE shape into your Canvas and resize the shape to 9″ x 4″.
2. I wanted a fancier edge so I WELDED a decorative square onto the end of my rectangle.  This is what my Canvas looked like before Welding.
GiftCard_Square
3. Once Welded, I resized the image to 9.625″ x 4″.  (The original size of the project was 4″ x 9 5⁄8″ so I converted it to decimals.)
4. Inserting Score Lines and Cut Lines can be tricky so it’s best to first place your image onto the 1″ x-axis and 1″ y-axis.  This will help you to place score lines perfectly.
GiftCard_Position
5. Insert four Score Lines and resize each one to 4″.  If you were doing this by hand, you would score at 1¾”, 4½” , 5¾”, 7″.  Since we have placed the image on the 1″ x-axis, we need to move our Score Lines to 2¾”, 5½” , 6¾”, 8″. You can do this by typing the numbers into the x-axis position box. The y-axis position box will be 1″ for each one.
GiftCard_ScoreLine6. Insert a Circle shape, unlock, and resize to 1″ x 1.75″. Center the Oval over the 6¾” Score Line, using Align Vertical as needed. If you wanted you could SLICE the Oval from the image and DELETE the unwanted images, but this is not needed since it will cut it out either way.
GiftCard_Oval7. Insert another Score Line and resize to 3.5″. Change the Score Line to a Cut Line in the Layers Panel.  Place the Cut Line at 1.25″ x-axis and 6.75 y-axis. (Centered over the Oval.)
GiftCard_CutLine
8. SELECT ALL and ATTACH so that all the Score Lines and Cut Line attach to the image.

The gift card holder was decorated using the Beary Christmas paper pack, Silver Foil Paper, and, of course, our Through the Year Stamp of the Month. You can continue through the blog hop and see more ideas from over twenty other Close To My Heart Consultants sharing their creations using this month’s Through the Year stamp set and other great Close to My Heart products on their blogs.

Now “Hop” on over to Melissa Robinson’s blog to see her work! Be sure to visit all the Consultants at their Blogs to get some great crafting tips and other fun ideas! Remember, the Through the Year Acrylic stamp set is available until November 30th!  Contact your CTMH Consultant, or visit the Promotions tab my website to see how you can get this stamp set for only $5.00. I can’t wait to see what you create!

Signature

Shop Cricut.com for 30% off Materials – excludes new, bulk, and bundle items.

product image
Through the Year Stamp Set

product image
Beary Christmas Paper Packet

product image
12 x 12 White Daisy Cardstock

product image
12 x 12 Cranberry Cardstock

product image
12 x 12 New England Ivy Cardstock

product image
VersaMark Ink

product image
Silver Foil Paper

product image
All Purpose Mat

product image
Silver Embossing Powder

product image
Craft Heater

product image
Thin 3D Foam Tape

product image
2 x 2 My Acrylix Block
air_2_machine
Cricut Explore Air 2

product image
2 x 3 1/2 My Acrylix Block

product image
Bonding Memories Glue Pen
product image
Tombow Permanent Adhesive
product image
Aluminum Cut Rail Paper Trimmer
product image
Microtip Scissors

* The links provided to the Cricut® website are through the ShareASale affiliate program and are posted as an endorsement. ShareASale compensates me a small portion of sales made through these advertisement links.